Unique Home Designs 5V0000ULWH00D Guide d'installation télécharger pdf (Page 12)

Install weather stripping (R) to the full length of the stop leg of the astragal

(J) (where the active door closes against the astragal). Start at the top,

remove approximately 6 inches of the protective backing at a time and

adhere to the astragal. Slowly and carefully work your way down the full

length of the door. Trim at the bottom as needed.

Determining Your Build Out Area (continued)Install astragal weather stripping

Page 12

Snap cover

Door jamb

Place the snap cover (A1) in the rst hinge-side jamb (Fig. 4, step 1). Using a rubber mallet, hit on the side of

snap cover seen in (Fig. 5) to securely snap cover into place. Once snap cover is secured, hold a wood block over

the length of the snap cover and hit with mallet to smooth any irregularities in the snap cover surface.

Repeat process for the second hinge-side jamb (A1) and top header (H1) snap covers.

Fully seated

Fig. 4 Fig. 5

Determining Your Build Out Area (continued)Install snap covers

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Pas de commentaire

Unique Home Designs 5V0000ULWH00D Guide d'installation Page 12